Assembly gloves, nitrile microfoam Cat. 2, EN 388 XL / 10

Assembly glove

• Nitrile microfoam Cat 2, EAN 388
• high abrasion resistance and grip
• Very good tactile feel
• Protection for light and medium-heavy work
• Size: XL/10

Instructions and information from the manufacturer Information leaflet for personal protective equipment (PPE) according to Regulation (EU) 2016/425, Annex II section 1.4.

Please read this information leaflet carefully before using the PPE.

You are obliged to include this information brochure when passing on the PPE or to hand it over to the recipient. For this purpose, this information brochure may be reproduced without restriction. Protective gloves, risk category II, size(s) 8 - 11, certification EN 388, notified body: INSTITUTE OF OCCUPATIONAL SAFETY, Chengdujska cesta 25, 1000 LJUBLJANA, Slovenia, identification number 1493. The CE marking certifies that the product complies with the essential health and safety requirements of Regulation (EU) 2016/425. The EU declaration of conformity can be viewed at www.storch.de. This product is personal protective equipment in risk category II. It protects you against: Mechanical risks. Applications other than those listed above are expressly excluded. This product therefore does not offer protection against, among other things: chemicals, microorganisms, cold, thermal risks (heat and/or fire), electric shock, radiation, or working with high-pressure jets. Please observe the attached pictograms, instructions, and the corresponding performance levels. Storage/Use/Inspection: Store in a cool, dry place. Keep away from direct sunlight, UV rays, or ozone sources. Do not store bent or under weight. If possible, store or transport the product in its original packaging. Influences such as light, humidity, temperature, and natural material changes over an extended period of time can result in a change in the product properties. Exact information on the storage time and service life of PPE is not possible, as both parameters depend on, among other things, the type of storage, temperature, humidity, degree of wear, and intensity of use. Therefore, after extended storage, as well as before and after each use, check this product for damage or material changes (e.g., brittle, cracked coatings/materials, holes, color changes, etc.). Check this product before each use for suitability for the intended purpose and for the correct size. Unsuitable or defective products must be disposed of and not used under any circumstances. The size of the product may deviate from the specifications due to stretching, for example. All performance characteristics were determined through tests under laboratory conditions. It is therefore recommended to check whether the PPE is suitable for the intended use, as workplace conditions may differ from those specified in the type approval test depending on various parameters (e.g., temperature, abrasion, intensity of use). If PPE has already been used, it may offer reduced performance due to the degree of wear. The manufacturer assumes no liability for improper use of the product. Instructions for wearing the item: Ensure your hands are clean and dry before putting on gloves. Insert your fingers into the respective glove and pull the glove loosely over your hand using the knitted cuff or cuff. Ensure the fit is correct. Gloves should fit snugly and securely around the palm, fingers, and spaces between the fingers. Fingernails, jewelry, and excessive stretching and pulling can damage the gloves. After use, gloves should be removed in such a way that the outer surface does not come into contact with clothing or skin, as these may be visibly and invisibly contaminated with harmful substances. Gloves should therefore be removed with the inner surface facing outwards. To do this, first detach the fingertips of the glove from your fingers. The knitted cuff or cuff can then be turned outwards to remove the glove. To ensure that the glove retains its comfort, it should be cleaned after each activity according to the cleaning and maintenance instructions. If necessary, this can and should be done while wearing the gloves. A suitable skin protectant can be used before starting work (after breaks and, if necessary, after washing hands). A suitable skin cleanser can be used during work (before breaks and before finishing work). A suitable skin care product can be used after work (after the last hand wash). Cleaning/Maintenance: The product should be cleaned with a damp cloth (lukewarm water), without chemicals, or by brushing, and allowed to air dry. Check this product for damage after cleaning and before re-wearing. Do not reuse damaged products. Depending on the type of cleaning, this may negatively affect the product's performance. The manufacturer therefore assumes no responsibility for the product if it is improperly cleaned. Disposal: Dispose of this product with household waste. Following intentional or accidental contact with chemicals, this product may be contaminated with environmentally harmful or hazardous substances. In this case, disposal must be carried out in accordance with applicable local regulations. Special instructions: PPE may cause allergic reactions in sensitive individuals. Special caution is recommended in cases of known hypersensitivity.

General explanations of achieved performance levels 1 - 6 / A - F Test result achieved (the higher the better) 0 Minimum performance level not achieved X Not tested or not applicable due to material or design All tests were conducted under laboratory conditions on the palm of the hand, and the respective performance levels were determined based on these. EN 420:2003 + A1:2009 Protective gloves - General requirements and test methods Test parameters Performance levels Test result Dexterity 1 - 5 5 Gloves must not be worn if there is a risk of becoming caught in moving machine parts. EN 388:2016 Protective gloves against mechanical risks EN 388 Test parameters Performance levels Test results A Abrasion resistance 1 - 4 4 B Cut resistance (Coupe test) 1 - 5 1ABCDE C Tear strength 1 - 4 2 D Puncture resistance 1 - 4 1 E Cut resistance (TDM) A - FX If gloves consist of two or more layers, the overall classification does not necessarily reflect the performance of the outermost layer. Year and month of manufacture Manufacturer EAC marking UkrSEPRO marking Read manufacturer's instructions and information CE marking