Premium wall paint for interiors with heavy use

Plasticizer- and solvent-free, emission-minimized, high-quality, double-coating plastic emulsion paint of wet abrasion class 1 according to DIN EN 13 300 for highly stressed surfaces.

Application: MEGA Premium Wall Paint is suitable for indoor use. For ceilings and walls where a durable matte finish is desired, on woodchip, plaster, concrete, Styrofoam, plasterboard, etc.

Interior emulsion paint for the highest demands

• Air hygiene perfect
• Free from fogging-active ingredients
• Durable
• Highly diffusible
• Low-stress and structure-preserving
• Matt according to DIN EN 13 300
• Very easy processing properties

Processing:

With a roller, brush, and airless sprayer. In most cases, a single coat is sufficient. On high-contrast surfaces, a primer coat diluted with a maximum of 3% water may be necessary.

Substrate: The substrate must be clean, dry, and sound. The guidelines of VOB, Part C, DIN 18 363, Paragraphs 2 and 3 must be observed. Non-adhering old coatings must be completely removed. Sandy or highly absorbent substrates, including plasterboard, require pretreatment with MEGA 202 Hydrogrund. Non-absorbent, solid substrates require a primer coat with MEGA 253 WP plus primer.

Technical data

Dilution: With water up to a maximum of 3%. Tinting: Up to a maximum of 5% tinting and solid colors. The stated properties may change as a result.

Cleaning of tools: Immediately after use with soap and water.

Drying: At 20 °C and 50% relative humidity, recoatable after approximately 4 hours. Allow longer drying times in cool, humid conditions.

Consumption: Approx. 130 - 150 ml/m² for one coat, depending on the substrate. Exact consumption values ​​for calculations must be determined on the project. Airless spraying: Nozzle: Pressure: 0.019 - 0.021 inch = 0.53 - 0.66 mm 150 - 180 bar Spray angle: 50°

Binder base: polyvinyl acetate dispersion

Specific gravity: 1.5 kg/l

Gloss level: Dull matt according to DIN EN 13 300

General information

Processing temperature: Minimum +5°C object and ambient temperature. Storage: Cool, but frost-free. Declaration of ingredients: Polyvinyl acetate dispersion, titanium dioxide, silicate fillers, water, additives, preservatives. Disposal instructions: Observe legal regulations when disposing of waste. Dispose of liquid material residues at the collection point for old paint/varnishes. Dispose of dried material residues as construction and demolition waste or as municipal or household waste.

EU limit value for this product: Product category: A/a 30 g/l VOC (2010) This product contains < 30 g/l VOC .

GIS CODE: BSW20

Technical data sheet

Sustainability data sheet