Processing of our weather protection paint

• Application method: brushing, rolling, spraying
• Processing temperature: at least + 8 °C (ambient and object temperature)
• Dilutable with water: yes
• Comment on processing: Diluting with water has a negative effect on the insulating properties of the product.
• Cleaning tools: Clean immediately after use with water and a small amount of wetting agent. Clean spray equipment particularly carefully. The short drying time requires intermediate cleaning of tools, especially during work breaks.

General information:

Products of the same type are conditionally miscible. In general, mixing different materials should be avoided. Protect the container and material from moisture, frost, direct sunlight, and high temperatures. Opened containers should always be tightly closed. Adequate ventilation must be ensured during and after application. When coating visually connected surfaces, ensure that batches are the same. Bright, intensive colors often have lower coverage due to pigmentation. In these cases, we recommend an opaque primer coat with our matching base coat, Cover Up. Coating films in intense and dark colors are prone to pigment breakage under mechanical stress. This abrasion on the coating surface is state-of-the-art and is not objectionable. On substrates containing water-soluble substances (water stains, nicotine, wood constituents, etc.), an appropriate primer must be used to seal off the ingredients. On horizontal and permanently wet surfaces, it must be ensured that the coating is not subjected to constant stress, e.g. from standing water. In the event of contact with products containing plasticizers (door and window seals, etc.), the sealant manufacturer's approval must be obtained or a test coat must be applied. If the product is used in rooms for the storage of beverages and food, we recommend removing the product during renovation and drying. When using the product, the current standards and guidelines of the trades must be observed (cf. VOB DIN18363 Part C, leaflets of the Federal Committee for Paint and Property Protection e. V., contents of training aids, etc.). This technical data sheet cannot list all possible application scenarios. If you have any questions about facts, circumstances, or their technical processing and treatment not listed, please always consult our technical field service or the applications technology department. viceHot li ne: +49 2330 63 243 If you are unsure about use or compatibility, please contact us using one of the following service options: Email address: All er gi ker be ra infoanwendungstechnik@doerken.de tung: +49 2330 63 184 Products that are not used correctly cannot be accepted. The information provided is the result of research and development work and was compiled using experience from the application technology field. Neither the written information nor any telephone agreements establish a contractual relationship or collateral obligations arising from the purchase contract. This information does not release the user from the responsibility of testing our products for their suitability for the intended purpose. With the publication of an updated version of the data sheet, previous editions lose their validity. Further information is available on our website www.doerkencoatings.de. All currently valid product-related technical data sheets and safety data sheets are also available there. Our general terms and conditions apply.