- Water-based and solvent-free
- Vapor permeable
- Wet abrasion class 1
-
DISPERLITH FK 10 is a dispersion paint/damp-proof paint for the preventative coating of ceilings and walls in interior spaces where there is a risk of mold and bacteria growth on the surface due to regularly elevated humidity. BLUE-BIO.FILM.STOP technology protects the surface of DISPERLITH FK 10 against mold, viruses, and bacteria infestation.
| brand
|
Facolith
|
| General property |
One-component
water-based
|
| Area of application
|
Inside
|
| Binder base |
Pure acrylate
|
| Wet abrasion class
|
1
|
| Opacity class
|
1 |
| Specific gravity
|
1.44
|
| Per square meter
|
250ml/m²
|
| Gloss level |
Frosted
|
| Health and Environment
|
LF
Plasticizer-free
Phthalate-free
|
| Maximum layer thickness in mm
|
0.4
|
| Surface protection
|
fungicide
Antibacterial
|
| Room suitability
|
Damp room
|
| Suitable foundations
|
Metallic
Organic
Mineral
|
| fitness
|
Machine tintable,
Suitable for food industry
UV-resistant
|
| Processing paint/varnish/glaze
|
syringes
Roll
Airless device
Cancel
|
| Processing temperature/humidity
|
6°C
|
| Delivery form
|
Fluid
|
| Delivery form / packaging unit |
12.5 l
|
| Color name
|
white
|
| Net weight in kg
|
18,375 |
| Gross weight in kg
|
19,001
|
| Suitability for damp rooms
|
Yes
|
Technical data sheet
DISPERLITH FK 10 www.fakolith.de 1/5 FAKOLITH Farben GmbH
Phone +49 (0) 62 53 / 23 94-0
Material type: Pure acrylic emulsion paint with BLUE-BIO.FILM.STOP technology. Particularly recommended for ceilings and walls in sanitary areas, as well as in storage and production areas with moderate to occasionally high moisture exposure. FAKOLITH's modern BIO.FILM.STOP technology effectively and reliably protects the paint film from mold and bacterial infestation.
Properties ■ Surface protection against mold, virus and bacterial infestation thanks to tested BLUE-BIO.FILM.STOP technology (DIN EN 15457:2014-11, ISO 21702:2019-05, ISO 22196:2011-08) ■ Wet abrasion: Class 1 ■ Contrast ratio: Coverage class 1 (< 5 m²/L / C1) ■ SD value = 0.27 m (V2) ■ W value = 0.08 (W3) ■ Low odor ■ Suitable for daily cleaning ■ Resistant to aqueous disinfectants ■ Excellent adhesion BLUE-BIO.FILM.STOP technology The selected combination of active ingredients creates a paint film with high qualitative and quantitative resistance to viruses, bacteria and fungi. The tests were conducted in accordance with DIN EN 15457:2014-11 (Testing the effectiveness of film protection - Aspergillus, Cladosporium, Penicillium), ISO 21702:2019-05 (Measurement of antiviral activity on plastics - Feline coronavirus, Strain Munich), and ISO 22196:2011-08 (Measurement of antibacterial activity on plastics - Escherichia coli, Listeria monocytogenes, Bacillus subtillis, Pseudonomas aeruginosa). The BIO.FILM.STOP technology has a preventative effect in the reversible phase. The formation of a biofilm on the surface of the coating is demonstrably inhibited by BioFilmStop prophylaxis. DISPERLITH FK 10 complies with the food hygiene requirements of Regulation (EC) 852/2004, Chapter II, “Special provisions for rooms where food is prepared, handled or processed”.
Areas of application DISPERLITH FK 10 is particularly suitable for applications - in swimming pools - in wellness areas - in the food industry - in healthcare - in hospitals - in the pharmaceutical industry
Thanks to BLUE-BIO.FILM.STOP technology, the protected paint film offers maximum germ-free protection for ceilings and walls in sanitary areas, kitchens and rooms where food is stored and produced.
Further recommendation : For damp rooms in which food is produced and the painted surfaces are cleaned daily, we recommend the highly durable emulsion paint DISPERLITH ELASTIC.
For substrates that come into direct contact with food, we recommend our products DISPERLITH FOODGRADE or FK 45 FOODGRADE, tested and certified according to Regulation (EC) 1935/2004, Regulation (EC) 1895/2005, Regulation (EC) 2023/2006, Regulation (EU) 10/2011, and Regulation (EU) No. 1282/2011. If you have any questions, please contact our technical department.
Substrates Substrate preparation according to VOB (German Construction Contract Procedures). The substrates must be dry and free from dirt and separating substances. Observe VOB, Part C, DIN 18363, Paragraph 3. The substrate preparation depends on the substrate: • Concrete: Remove release agent residues if necessary with FAKOLITH FK 11 Cleaner. Remove sanding substances and pre-treat the substrate with FAKOLITH FK 16 Deep Primer. • Mineral plasters: Prime with FAKOLITH FK 16 Deep Primer or DISPERLITH PRIMER. • Substrates infected with mold and bacteria: Clean with FAKOLITH FK 12, diluted 1:4 with water. Then apply a generous coat of FAKOLITH FK 14 aqueous anti-fungal solution. After cleaning, check the substrate for strength and apply FAKOLITH FK 16 Deep Primer if necessary. DISPERLITH PRIMER can be used as an alternative to FAKOLITH FK 14 Antifungal and FAKOLITH FK 16 Deep Penetrating Primer. DISPERLITH PRIMER can be applied from +4°C. • Substrates infected with yeast and bacteria: Clean with FAKOLITH FK 39. Then apply a generous coat of FAKOLITH FK 14 aqueous antifungal solution. After cleaning, check the substrate for strength and, if necessary, apply FAKOLITH FK 16 Deep Penetrating Primer. DISPERLITH PRIMER can be used as an alternative to FAKOLITH FK 14 and FAKOLITH FK 16. DISPERLITH Primer can be applied from +4°C. • Substrates soiled with grease, oil, or soot: Clean with FAKOLITH FK 11, diluted 1:20 with water. After cleaning, check the substrate for strength and, if necessary, apply FAKOLITH FK 16 Deep Penetrating Primer. • Non-load-bearing coatings: Remove and clean the substrate. Apply FAKOLITH FK 16 deep penetrating primer or DISPERLITH PRIMER. • Sound emulsion paints: Check the strength of the old coating(s). Clean the surface. If necessary, strengthen chalky surfaces with FAKOLITH FK 16 deep penetrating primer or DISPERLITH PRIMER. • Iron, steel, stainless steel, aluminum, copper, powder-coated metals: Prepare the surface and remove any residue of oil, grease, salt or dirt. Recommendation: Apply FAKOLITH FK 11 cleaner, diluted 1:20 with water, and clean off immediately. Wipe off with a solvent to prevent corrosion. Information on surface preparation methods can be found in DIN EN ISO 12944-4. Remove rust from oxidized surfaces. Apply FAKOLITH FK 9, leave to work for 10 minutes and then wash off again. Dry the surface for 1 hour and then wipe off with a solvent (e.g. universal thinner). Apply FAKOLITH FK 44-POX rust protection primer and adhesion promoter in 1-2 coats. FAKOLITH FK 44-POX is odorless and can be applied at temperatures above +4°C. The adhesion of FK 44-POX to powder-coated substrates must be confirmed by a tensile bond test. Please read the technical information and safety data sheets before application. Note the substrate moisture, test the strength of the old coatings using a cross-cut test, and clarify the spatial and temporal conditions at the object. Renovation and maintenance work in industrial spaces requires thorough planning. We recommend inquiring about the individual coating requirements and clarifying the on-site conditions before starting work: - Which cleaning agents will be used in what concentration, at what temperature, and how frequently during daily production? - What are the temperatures/humidity during the renovation work? We recommend coordinating the work in detail, taking into account the processing conditions and expected drying times. When will production resume? What moisture exposure can be expected, and when will the renovated section be cleaned for the first time? Application: Stir DISPERLITH FK 10 thoroughly. Apply by brush, roller, or airless spray. For spraying, we recommend the following settings: Nozzle = 5/17. Spray pressure: 200 bar. Application: Dilute 5% with water. Binder: Pure acrylic. VOC content: Category: a (Wb): Maximum 30 g/l VOC (Directive 2004/42/EC). The product contains a maximum of 30 g/l VOC. Pigmentation: Titanium dioxide rutile. Density: Density (23°C ±0.5): 1.44 ±0.02 g/cm³. Flash point Not applicable Viscosity Viscosity (ASTM 3, 250 rpm at 23°C ±0.5): 1750 mPa - s. ± 250 4/5 Solids 65% ± 2% Gloss level Matt (DIN EN 13300) PVC 77% (pigment volume concentration) Colour White. Tinting Tinting possible ex works on request. Tinting pastes With binder-free colour pastes for water-based systems up to a maximum of 3% is possible. Consumption Approx. 250 ml/m². The consumption depends on the structure and absorbency of the substrate. Apply in 2 coats. Dilution Dilute the primer coat with water up to a maximum of 5%. Apply the top coat undiluted. Drying time Drying time between coats approx. 3 hours, fully dry after approx. 24 hours. Fully load-bearing after industrial cleaning after approximately 48 hours (+20°C / 60% relative humidity). Lower temperatures, high humidity, and limited air circulation extend drying times. Application temperature: Minimum processing temperature +6°C. Maximum humidity: 70%. Compatibility: Do not mix with other paints. Storage: 24 months in a closed container. Do not store at temperatures below 5°C or above 30°C. Containers: 2.5-, 5-, and 12.5-liter buckets. Occupational safety: For correct handling, read the safety data sheet, use your personal protective equipment, and take the prescribed measures. Disposal: Dispose of the contents/container in accordance with local, regional, national, and international regulations. Note: Successful renovation requires professional planning and detailed documentation. We offer "FAKOLITH Checklists" and project-specific "Renovation Concepts" for this purpose. These documents are available online at www.fakolith.de. Our application technology department will be happy to provide you with personal advice. Safety Data Sheet DISPERLITH FK 10 LEGAL NOTICE: The companies FAKOLITH Farben GmbH and FAKOLITH Chemical Systems SLU are jointly certified according to the quality management system DIN EN ISO 9001:2015 by TÜV Rheinland Cert, Cert. No. 01100071679/01. This technical information and recommendation regarding the processing and use of the product is based on our current knowledge and experience under standard situations and on the use of the product within its shelf life. This information does not release the buyer and/or user from the obligation to determine whether our offer, recommendation or the technical quality and properties of our products meet their specific requirements. FAKOLITH reserves the right to update the properties and specifications of the products. Updated versions will be published at www.fakolith.de. An updated version of this document invalidates the previous version (see creation date). Technical Information 12.10.2021F FAKOLITH Farben GmbH Tel. +49 (0) 62 53 / 23 94-0 5/5 www.fakolith.de
